GMS-744EU Multichannel MIDI/CV Converter
Up to 8 Channels of high resolution CVs, Gates, & MIDI Clock
The MIDI to CV Converter module is designed to convert MIDI note commands into corresponding analog voltage level outputs to be used by devices such as voltage controlled oscillators in analog synthesizers. In addition to a changing analog voltage on one channel, the module can also supply a second analog voltage corresponding to the MIDI velocity information. This analog voltage can be used to vary the response of an envelope generator to allow the channels dynamics to be controlled by keyboard velocity information.
BASIC FUNCTIONS
The GMS-744EU Multichannel MIDI to CV converter contains eight complete converter channels, each channel capable of producing an analog output and a gate output. When a two channel mode is selected, one analog channel will produce the voltage equivalent of the input MIDI note value, one analog channel will produce the voltage equivalent of the MIDI velocity value, one gate channel will produce a gate signal for the duration of the MIDI note on to note off time, and one gate channel will produce a 25 millisecond trigger pulse.
POLYPHONIC OPERATING MODES
• Two channel with gate and trigger
• Three or four channels with gate
• Two channels with separate sequential MIDI channel numbers
• Four channels with separate sequential MIDI channel numbers
ADDITIONAL FEATURES
Each channels can be assigned to a MIDI channel to listen on. Assigning multiple channels to the same MIDI port engages polyphonic note handling. If the setting is not modified by system commands received on the port, the channel also serves as the default analog output channel. These settings are made through menus displayed on the front panel OLED display. Settings may also be stored to and recalled from internal non-volatile storage.
The MIDI clock on the input channel is divided internally and output on the MIDI CLOCK output jack. Divisor ratio is set through a clock control menu. The module also outputs a clock run signal on the clock output connector that can be used to start, stop, or pause external sequencers to maintain synchronization.
MODE | FUNCTION | CHANNEL |
---|---|---|
1 | 2 Ch. Independent Note CV, Velocity CV, Gate, Trigger |
Successive MIDI Channels |
2 | 2 Ch. Polyphonic Note CV, Velocity CV, Gate, Trigger |
Common MIDI Channel |
3 | 4 Ch. Polyphonic Note CV, Gate |
Common MIDI Channel |
5 | 4 Ch. Independent Note CV, Gate |
Succesive MIDI Channels |
6 | 2 Ch. Independent - Legato On Note CV, Velocity CV, Gate, Trigger |
Successive MIDI Channels |
7 | 2 Ch. Independent - Split Keyboard Ch. 1 (C0-B1) Note CV, Gate; Ch. 2 (C2-C5) Note CV, Gate |
Common MIDI Channel |
9 | 1 Ch. with Pitchbend, Mod Wheel Note CV, Velocity CV, Pitchbend CV, Mod Wheel CV, Gate, Trigger |
Current MIDI Channel |
10 | 2 Ch. Independent - 2 Ch. LFO Note CV, LFO Waveform, Gate, Trigger |
Successive MIDI Channels |
16 | Test/Tuning Common Note CV and common Gate on all outputs |
Current MIDI Channel |
Technical Specifications
Each Channel | |||
---|---|---|---|
Voltage Scale | 1 Volt/Octave - .0833 Volts/Semitone | ||
MIDI Note Range | Note number 0 - 127 produces -4.0 V to +6.0 V 0 V = MIDI Note #48 = C4 |
||
D/A Converter Output | 16 Bits; full-scale range +-10 V Program selectable - +-5 V or 0-10 V Zero volts setting - C2, C3, C4 |
||
Gate/Trigger Output | 0 - +5 V | ||
Module Power | +15 Volts 30 mA., -15 Volts 25 mA., +5 Volts 75 mA |
||
Module Size | Panel height - 5.03 inches (128 mm); Panel width - 4.00 inches (102 mm); Depth (behind panel) 2.30 inches (59 mm) |
Multichannel MIDI/CV Converter
- Brands Grove Audio
- Product Code: GMS-744EU
- Availability: Out Of Stock
-
$399.00