Two full function analog voltage controlled oscillators combined in one 2MU wide panel along with essential support functions provide stable wide range waveforms including sine, triangle, pulse, saw and square waves. In addition, an analog selector followed by a linear control VCA allows selection of one of the oscillator waveforms and scaling of the output amplitude under voltage control on a separate WAVE output.
Each oscillator has a 1 volt per octave control input and an additional frequency control voltage input with attenuator give flexible control over the frequency output in addition to a calibrated range switch for accurate octave scaling.
Both linear and exponential FM modulation inputs are available. The linear input has selectable AC or DC coupling. Both inputs can be scaled with a CV level control.
The pulse waveform output has a control for pulse width and a voltage control input with attenuator for pulse width modulation.
The oscillator can be synced to an external waveform. A soft/hard coupling switch is provided to control the sync behavior.
The 2MU module is supplied with standard compliment of black knobs with silver inserts.
|Frequency Range||0.1 Hz to 20 KHz|
|1 Volt/Octave Range||Operation over 10 octaves|
|Waveform Output Level||+- 5V PP|
|Freq. Range Switch||Calibrated range switch, LFO, 32', 16', 8', 4', 2'|
|Waveform Outputs||Sine, triangle, pulse, saw, square (through waveform switch)|
|Modulation Inputs||1V/octave, linear FM (AC/DC coupling), exponential FM, pulse width modulation|
|WAVE output VCA gain||1.0 Volt/Volt|
|Module Power||+15 Volts 130 mA.
-15 Volts 110 mA.
+5 Volts 25 mA.
|Module Size||Panel height - 8.75 inches (222 mm)
Panel width - 4.25 inches (108 mm)
Depth (behind panel) 2.125 inches (54 mm)
Dual Voltage Controlled Oscillator
- Brands Grove Audio
- Product Code: GMS-302
- Availability: In Stock